1975 JOHN DEERE 450 C for sale in Rochester, IN
1975 JOHN DEERE 450 C, 14,400 lb (5152 kg) Transport Height, 7 ft 11.8 in. (2.43 m) Transport Length , 15 ft 5.5 in. (4.71 m) Machine Width, 6 ft (1.8 m) ENGINE, John Deere 300 Series Number of Cylinders and Displacement, 4 cylinders, 219 cu in. (3.6 L) Air Intake System, Turbocharged Bore and Stroke, 4.02 x 4.33 cu in. (102 x 110 mm) Net hp at 2500 rpm, 65 SAE hp (49 kW) DIN 49 kW Maximum Torque at 1300 rpm,178 lb-ft (241 Nïm) Nozzle Opening Pressure: New, 3200 ± 50 psi (22 065 ± 345 kPa) Used,3000 ± 50 psi (20 685 ± 345 kPa) Valve Clearance (Cold): intake, 0.014 in. (0.36 mm) Exhaust, 0.018 in. (0.46 mm) Oil Pressure at Fast Idle, 50 ± 15 psi (345 ± 105 kPa) Static Injection Pump Timing, Timing lines aligned w/flywheel located at TDC Dynamic Injection Pump Timing at Rated Load rpm*, 17 + 0 - 1, BTDC Speeds: Slow Idle, 800 rpm Fast Idle, 267502700 rpm Rated Full Load, 2500 rpm Cylinder Pressure Hot (Min), 350 psi (2415 kPa) cranking with injectors removed Turbo Boost Pressure at Rated Full Load , 708.5 psi (48059 kPa) Flywheel Teeth, 142 Note: For latest information, see Dealer Technical Assistance Center (DTAC) Solution K000413. TRANSMISSION Model and Speeds, HLR: 4 speed ranges with high, low and reverse speeds Lube Pressure, 58072 psi (4000500 kPa) HLR Pressure, 1650185 psi (114001275 kPa) HYDRAULIC SYSTEM0 Open-Center Pump Size, 1.48 cu in. (24.3 cm 3 ) Pump Flow (Min) at 2250 psi (15 515 kPa) and 2500 rpm, 14.0 gpm (53 L/min) new Pump Size, 2.29 cu in. (37.5 cm 3 ) Pump Flow (Min) at 2250 psi (15 515 kPa) and 2500 rpm, 21.6 gpm (81.8 L/min) new Pump Size (Loader), 2.77 cu in. (45.4 cm 3 ) Pump Flow (Min) at 2250 psi (15 515 kPa) and 2500 rpm, 26.1 gpm (98.8 L/min) Asking $11500, Located in ROCHESTER IN 46975, Contact Raulph at 574-223-4738 for more information.
Mileage: 0
Mileage: 0
|
|